DryBUDDY Mini
LED Indicator Guide
| Green LED | Red LED | State | Meaning / Action |
|---|---|---|---|
| Blink 0.5s on / 3s off | OFF | Drying | Device is performing a dry cycle. Auto-shuts off after 20h. Typical cycle ~6h (varies by load). |
| Solid ON (4H after dry complete) | OFF | Dry Complete | Green LED remains on for 4h once drying is finished. Then both LEDs turn off. Remove your devices. |
| OFF | OFF | Idle (Deep Sleep) | Device is powered but inactive. Slide switch OFF to fully power down to save CR1632 battery life. |
| OFF | Solid ON | Electronic Rice is Spent | Desiccant beads are saturated. Please recycle. Replacement Drying Pods will soon be available. |
| Solid ON | Solid ON | Sensor Fault | • Power OFF, wait 10s, then power ON. • If not resolved, contact Redux Support at Support@redux.com |
Troubleshooting Guide
| Problem/Fault | Possible Cause | Solution |
|---|---|---|
| Device won't power on for drying | • Dead or missing battery | • Install fresh CR1632 coin cell battery (check polarity) |
| If LEDs do not light up | • Battery drained • Faulty power switch or LED circuit |
• Replace CR1632 battery • Power-cycle switch (OFF → ON) • If still dark, contact Support at Support@redux.com |
| Sensor fault, solid green & solid red light | • Device stuck in error state | • Power OFF, wait 10s, then power ON • If not resolved, contact Redux Support at Support@redux.com |
Frequently Asked Questions
What if I opened DryBUDDY Mini prior to use?
Important: Opening DryBUDDY Mini before use voids the warranty. You must use DryBUDDY Mini immediately once it has been opened and removed from packaging.
When will refill cartridges be available for purchase?
Coming soon! Replacement Drying Pods will be available for purchase in the near future.
Submit a Support Request
Additional Questions or Concerns?
Contact Redux Support at Support@redux.com
